Jump to content

Shudsy's Orber


Recommended Posts

Posted
On 7-3-2018 at 4:44 AM, PayPalMeRSGP said:

Multiple times to the point I stopped using clan wars. I think the reason this happens is because entering the portal hits a loadzone, as a result jewelry teleports options have to refresh/reload. You can see this happen by entering the clan wars portal and while your character is walking to the portal, go into the equipment slot and right click a jewelry teleport to show the options. As soon as you hit the portal loadzone, you will notice that not all teleport options are available.   

zt0XCSn.png

It could be that your script attempts to teleport to edgeville too quickly after traversing the loadzone and not all options are available. I'm assuming that in your code somewhere you have something resembling:

if(Equipment.interact(Glory slot, teleport edgeville)){

//webwalk to air orb

}

and Equipment.interact(Glory slot, teleport edgeville) may have wierd behavior due to the missing options. 

Just had this several times today + hangs on load screen.

Posted (edited)

Another bug:

Misclicks at clanwars and starts running from al kharid to edgeville

 

[ERROR][Bot #1][03/18 07:27:07 PM]: Error on event onStart()!
java.lang.NullPointerException
    at org.osbot.rs07.api.Tabs.open(yn:251)
    at org.osbot.rs07.api.Quests.IiIiIiiiiIII(bn:211)
    at org.osbot.rs07.api.Quests.isComplete(bn:242)
    at org.osbot.LPt9.IiIiIiiiiIII(x:27)
    at org.osbot.HA.IiIiIiiiiIII(pe:1247)
    at org.osbot.Gb.IiIiIiiiiIII(zj:333)
    at org.osbot.Gb.IiIiIiiiiIII(zj:281)
    at org.osbot.Ob.IiIiIiiiiIII(t:66)
    at org.osbot.rs07.event.WebWalkEvent.prefetchRequirements(ki:39)
    at org.osbot.rs07.event.WebWalkEvent.onStart(ki:183)
    at org.osbot.rs07.event.EventExecutor$2.run(ln:213)
    at org.osbot.rs07.event.EventExecutor.execute(ln:282)
    at org.osbot.rs07.script.MethodProvider.execute(cg:424)
    at org.osbot.rs07.api.Walking.webWalk(ep:137)
    at mypackage.Prn.m(o:164)
    at mypackage.AirOrber.onLoop(h:496)
    at org.osbot.rs07.event.ScriptExecutor$InternalExecutor.run(em:64)
    at java.lang.Thread.run(Unknown Source)
[ERROR][Bot #1][03/18 07:27:07 PM]: Error executing event : org.osbot.rs07.event.WebWalkEvent@fc713f
java.lang.NullPointerException
    at org.osbot.rs07.event.WebWalkEvent.execute(ki:44)
    at org.osbot.rs07.event.EventExecutor$2.run(ln:235)
    at org.osbot.rs07.event.EventExecutor.execute(ln:282)
    at org.osbot.rs07.script.MethodProvider.execute(cg:424)
    at org.osbot.rs07.api.Walking.webWalk(ep:137)
    at mypackage.Prn.m(o:164)
    at mypackage.AirOrber.onLoop(h:496)
    at org.osbot.rs07.event.ScriptExecutor$InternalExecutor.run(em:64)
    at java.lang.Thread.run(Unknown Source)

 

Edited by CodeDdx
updated info
Posted
21 hours ago, Shudsy said:

I'll take a look at the bugs related to clan wars. If you have too much problems with it, i suggest using the glory and edge method until its fixed.

Another bug at CW. Opens bank and closes it instantly. Does it forever until you stop the script.

 

[INFO][Bot #1][03/20 07:57:36 em]: WebWalkingEvent; No route found! Destinations = [[x=3092, y=3468, z=0], [x=3093, y=3468, z=0], [x=3094, y=3468, z=0], [x=3095, y=3468, z=0], [x=3096, y=3468, z=0], [x=3097, y=3468, z=0], [x=3092, y=3469, z=0], [x=3093, y=3469, z=0], [x=3094, y=3469, z=0], [x=3095, y=3469, z=0], [x=3096, y=3469, z=0], [x=3097, y=3469, z=0], [x=3092, y=3470, z=0], [x=3093, y=3470, z=0], [x=3094, y=3470, z=0], [x=3095, y=3470, z=0], [x=3096, y=3470, z=0], [x=3097, y=3470, z=0], [x=3092, y=3471, z=0], [x=3093, y=3471, z=0], [x=3094, y=3471, z=0], [x=3095, y=3471, z=0], [x=3096, y=3471, z=0], [x=3097, y=3471, z=0], [x=3092, y=3472, z=0], [x=3093, y=3472, z=0], [x=3094, y=3472, z=0], [x=3095, y=3472, z=0], [x=3096, y=3472, z=0], [x=3097, y=3472, z=0], [x=3092, y=3473, z=0], [x=3093, y=3473, z=0], [x=3094, y=3473, z=0], [x=3095, y=3473, z=0], [x=3096, y=3473, z=0], [x=3097, y=3473, z=0]];
[INFO][Bot #1][03/20 07:57:36 em]: WebWalkingEvent; No route found! Destinations = [[x=3092, y=3468, z=0], [x=3093, y=3468, z=0], [x=3094, y=3468, z=0], [x=3095, y=3468, z=0], [x=3096, y=3468, z=0], [x=3097, y=3468, z=0], [x=3092, y=3469, z=0], [x=3093, y=3469, z=0], [x=3094, y=3469, z=0], [x=3095, y=3469, z=0], [x=3096, y=3469, z=0], [x=3097, y=3469, z=0], [x=3092, y=3470, z=0], [x=3093, y=3470, z=0], [x=3094, y=3470, z=0], [x=3095, y=3470, z=0], [x=3096, y=3470, z=0], [x=3097, y=3470, z=0], [x=3092, y=3471, z=0], [x=3093, y=3471, z=0], [x=3094, y=3471, z=0], [x=3095, y=3471, z=0], [x=3096, y=3471, z=0], [x=3097, y=3471, z=0], [x=3092, y=3472, z=0], [x=3093, y=3472, z=0], [x=3094, y=3472, z=0], [x=3095, y=3472, z=0], [x=3096, y=3472, z=0], [x=3097, y=3472, z=0], [x=3092, y=3473, z=0], [x=3093, y=3473, z=0], [x=3094, y=3473, z=0], [x=3095, y=3473, z=0], [x=3096, y=3473, z=0], [x=3097, y=3473, z=0]];
[ERROR][Bot #1][03/20 07:57:36 em]: Error executing event : org.osbot.rs07.event.InteractionEvent@1f77d8bc
java.lang.NullPointerException
    at org.osbot.rs07.input.mouse.EquipmentSlotDestination.isVisible(xn:248)
    at org.osbot.rs07.event.InteractionEvent.execute(kp:463)
    at org.osbot.rs07.event.EventExecutor$2.run(ln:235)
    at org.osbot.rs07.event.EventExecutor.execute(ln:282)
    at org.osbot.rs07.script.MethodProvider.execute(cg:424)
    at org.osbot.rs07.api.Equipment.interact(yf:293)
    at mypackage.Prn.m(o:195)
    at mypackage.AirOrber.onLoop(h:496)
    at org.osbot.rs07.event.ScriptExecutor$InternalExecutor.run(em:64)
    at java.lang.Thread.run(Unknown Source)
[INFO][Bot #1][03/20 07:57:37 em]: WebWalkingEvent; No route found! Destinations = [[x=3092, y=3468, z=0], [x=3093, y=3468, z=0], [x=3094, y=3468, z=0], [x=3095, y=3468, z=0], [x=3096, y=3468, z=0], [x=3097, y=3468, z=0], [x=3092, y=3469, z=0], [x=3093, y=3469, z=0], [x=3094, y=3469, z=0], [x=3095, y=3469, z=0], [x=3096, y=3469, z=0], [x=3097, y=3469, z=0], [x=3092, y=3470, z=0], [x=3093, y=3470, z=0], [x=3094, y=3470, z=0], [x=3095, y=3470, z=0], [x=3096, y=3470, z=0], [x=3097, y=3470, z=0], [x=3092, y=3471, z=0], [x=3093, y=3471, z=0], [x=3094, y=3471, z=0], [x=3095, y=3471, z=0], [x=3096, y=3471, z=0], [x=3097, y=3471, z=0], [x=3092, y=3472, z=0], [x=3093, y=3472, z=0], [x=3094, y=3472, z=0], [x=3095, y=3472, z=0], [x=3096, y=3472, z=0], [x=3097, y=3472, z=0], [x=3092, y=3473, z=0], [x=3093, y=3473, z=0], [x=3094, y=3473, z=0], [x=3095, y=3473, z=0], [x=3096, y=3473, z=0], [x=3097, y=3473, z=0]];
[INFO][Bot #1][03/20 07:57:49 em]: WebWalkingEvent; We have reached the final destination!
[INFO][Bot #1][03/20 07:57:49 em]: WebWalkingEvent; We have reached the final destination!
[INFO][Bot #1][03/20 07:58:07 em]: WebWalkingEvent; We have reached the final destination!
[INFO][Bot #1][03/20 07:58:08 em]: WebWalkingEvent; We have reached the final destination!
[INFO][Bot #1][03/20 07:58:33 em]: WebWalkingEvent; We have reached the final destination!
[INFO][Bot #1][03/20 07:58:45 em]: WebWalkingEvent; We have reached the final destination!

Posted

I've taken a look at all the bugs. Some of them are client related and not script related so theres nothing i can do.

I've fixed the ones i could find myself but bugs such as:

Opening and closing bank
Stuck inside Clan wars portal

Are bugs that i can't produce myself. This means that if this happens again, i need pictures to properly determine that could have produced this bug. I need to look at the status message aswell as items.

Also added a failsafe that logs you out if you're AFK for too long.

Posted (edited)
10 hours ago, Shudsy said:

I've taken a look at all the bugs. Some of them are client related and not script related so theres nothing i can do.

I've fixed the ones i could find myself but bugs such as:

Opening and closing bank
Stuck inside Clan wars portal

Are bugs that i can't produce myself. This means that if this happens again, i need pictures to properly determine that could have produced this bug. I need to look at the status message aswell as items.

Also added a failsafe that logs you out if you're AFK for too long.

Stuck inside CW has status message "Walking to orb". If I hit the pause and then resume button it'll glory teleport and continue. If I don't it's just gonna sit there until logout.

Have you pushed the update? How can we check if we're running the updated version? :)

 

EDIT:

Just happened again (AFK inside portal). 

Inventory open, standing still, status saying "Walking to Orb". Nothing at all in the logger, last thing in the logger was "We have reached the final destination!" 5 minutes before that and that msg shows when you arrive at the obelisk. 

 

EDIT2: 

Just happened again this time with worn equipment menu open. 

Edited by LeBron
Posted (edited)
22 hours ago, LeBron said:

Stuck inside CW has status message "Walking to orb". If I hit the pause and then resume button it'll glory teleport and continue. If I don't it's just gonna sit there until logout.

Have you pushed the update? How can we check if we're running the updated version? :)

 

EDIT:

Just happened again (AFK inside portal). 

Inventory open, standing still, status saying "Walking to Orb". Nothing at all in the logger, last thing in the logger was "We have reached the final destination!" 5 minutes before that and that msg shows when you arrive at the obelisk. 

 

EDIT2: 

Just happened again this time with worn equipment menu open. 

I think i know the error behind this. I'll push a fix later today.

 

EDIT: Can confirm i was able to reproduce the error when you're stuck inside the portal. This was caused by lag and a faulty method. Pushing a fix right now.

You can check if the latest version is updated by looking at the logger when starting script. It'll say V2.5

Edited by Shudsy
Posted
6 hours ago, Shudsy said:

I think i know the error behind this. I'll push a fix later today.

 

EDIT: Can confirm i was able to reproduce the error when you're stuck inside the portal. This was caused by lag and a faulty method. Pushing a fix right now.

You can check if the latest version is updated by looking at the logger when starting script. It'll say V2.5

Says nothing about version number in the logger when you start the script. "[INFO][Bot #1][03/23 07:03:53 em]: Loaded 4 built-in random solvers!"

The bug isn't fixed but your update is live because now when it gets stuck it says "Clicking portal" and in the logger it says "123" inventory open. 

Posted
9 minutes ago, LeBron said:

Says nothing about version number in the logger when you start the script. "[INFO][Bot #1][03/23 07:03:53 em]: Loaded 4 built-in random solvers!"

The bug isn't fixed but your update is live because now when it gets stuck it says "Clicking portal" and in the logger it says "123" inventory open. 

That's yesterdays update. The latest one isnt live aslong as the logger doesnt say version number.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...