Hii everyone I have one question, does anyone fly drones?

If yes, shere your builds in comments

If anyone wants to join this hobby feel free to ask me questions.

There is my racer build:

This cost me around 350-400euros

70-100mph (should be, havent tested yet)

Fly sky i6 transmiter with 6 channels.

zmr250 frame.

3 LI-PO 2200mah batterys 20-40 C (if fly slow fly time is 6-10min if fast 3-5min)

200MW transmiter

props: 2 3x5x4.5       2 2x5x4.5

goggles: Quanum (not sure about version)

Flight controller: naze rev5

one of the cheapest FPV cameras ( dont know version)

motors: Cobra 2204/2300kv

dont know much about esc too.

Sorry for bad pictures quality

 

 

 

 

 

 

 

 

Edited November 12, 20169 yr by m4tis

 

LOL

 

:frog2:

I've really wanted to build my own drone, as much from scratch as I could but i'm just waiting to get the time and funds to do it

 

only with some cheap drone's , waiting till you can fly up to 20km and longer fly time.

 

flying for 15 minuts its wort it

@@Acerd 

I've really wanted to build my own drone, as much from scratch as I could but i'm just waiting to get the time and funds to do it

 

nice. text me if you will build one

What kind? Racing or filming?

Edited November 12, 20169 yr by m4tis

nice. text me if you will build one

What kind? Racing or filming?

 

Neither really ,just want to make one to fly around

from scratch, getting something to take off would be a dream x)

Neither really ,just want to make one to fly around

from scratch, getting something to take off would be a dream x)

 

Then you can build mini one. a lot cheaper. Do you have any soldering skills? or know anything about electric ?

never been into drones

 

but it that price really worth the amount of time you can fly?

3-10min seems not that much.

 

what about the charging times?

 

have heard some can fly a few min but will charge for hours

 

Then you can build mini one. a lot cheaper. Do you have any soldering skills? or know anything about electric ?

 When I say make from scratch, I really mean that - I plan to design a PCB and get it printed, program the thing, (I would probably buy a radio module or something though, however for a start I might try it with IR... this would work okay for a short range and would mean I could do initial testing with a TV remote

 

Idk when I will start the project though, if I do, i will probably make a post about it 

cheers:)