Jump to content

Perfect Blast Furnace


Czar

Recommended Posts

GE Mode works after a trip, you can't start the script at GE just yet. I highly recommend letting the script do a few runs and then GE mode will do the rest. However I am re-writing GE mode since it is still in beta mode and I haven't perfected it yet, I just wanted to make some experiments with code. Stay tuned. Next updates will be stamina (almost done with re-write) and GE mode.

Yep the script is working, just added a neat update for rune and gold ore too ^^ :D As for ROI, this script is amazing with making your money back + making ALOT more than you started with. Typically you get 2-3 days of pure blast furnace botting, first day being the break-even point

  • Like 1
Link to comment
Share on other sites

The coffer portion of the script isn't working for me on injection or reflection (tried both just to make sure). It clicks the coins then on the coffer but does not type anything to deposit. Just a heads up, everything else seems to be working well besides the beta portion (couple glitches with knights sword quest and during smithing it also didn't input the amount of units to smith just sat there at smith x screen). Just need to babysit it and watch coffer.

  • Like 1
Link to comment
Share on other sites

On 4/29/2018 at 2:26 AM, Czar said:

GE Mode works after a trip, you can't start the script at GE just yet. I highly recommend letting the script do a few runs and then GE mode will do the rest. However I am re-writing GE mode since it is still in beta mode and I haven't perfected it yet, I just wanted to make some experiments with code. Stay tuned. Next updates will be stamina (almost done with re-write) and GE mode.

Yep the script is working, just added a neat update for rune and gold ore too ^^ :D As for ROI, this script is amazing with making your money back + making ALOT more than you started with. Typically you get 2-3 days of pure blast furnace botting, first day being the break-even point


Suicide botting Id assume? Or Running for like x hours a day? Sorry for bugging. 

  • Like 1
Link to comment
Share on other sites

Just tried it out.

Reports on the questing/smithing experimental:

It misused a teleport, had to telly myself. 

If it runs out of telly (due to above) then it will start walking if the next section isnt loaded (didnt walk far enough to start next load) it will run back and forth. Just have to click further out.

Stuck going between tunnel back and forth near the ore

It has trouble smithing the daggers for the remaining level, it wont input amount; it just spam clicks dagger.


Sugggestion: When first entering that cave for the ore, if its low on running, I can see fresh accounts dying. Maybe set it to wait for certain run energy before entering. 


^ The quest/leveling took 30 min even with the error/by hand section. Pretty great despite the small things.


Now after that finished, it cant start doing blast furnace. It gives me this over and over. Im going to walk over to the furnace and see if I can do that for now. 

 

[INFO][Bot #1][05/01 10:56:14 AM]:  -- 
[INFO][Bot #1][05/01 10:56:14 AM]:   
[INFO][Bot #1][05/01 10:56:14 AM]:   
[INFO][Bot #1][05/01 10:56:14 AM]:   
[INFO][Bot #1][05/01 10:56:14 AM]:   
[INFO][Bot #1][05/01 10:56:14 AM]:   
[INFO][Bot #1][05/01 10:56:14 AM]: / Pathfinding error, source: [x=2756, y=3478, z=0] and target: [x=2840, y=10127, z=0], report this to Czar immediately!
[INFO][Bot #1][05/01 10:56:15 AM]: Path 3 (Start: [x=2757, y=3477, z=0] and path to: [x=2780, y=10161, z=0]) failed!
[INFO][Bot #1][05/01 10:56:15 AM]:   
[INFO][Bot #1][05/01 10:56:15 AM]:  -- 
[INFO][Bot #1][05/01 10:56:15 AM]:   
[INFO][Bot #1][05/01 10:56:15 AM]: Node 1 ([x=2757, y=3477, z=0]) is added to the graph, good job.. moving on to node 2..
[INFO][Bot #1][05/01 10:56:15 AM]: Node 2 ([x=2780, y=10161, z=0]) is added to the graph, now what?
[INFO][Bot #1][05/01 10:56:15 AM]:   
[INFO][Bot #1][05/01 10:56:15 AM]:  -- 
[INFO][Bot #1][05/01 10:56:15 AM]:   
[INFO][Bot #1][05/01 10:56:15 AM]:   
[INFO][Bot #1][05/01 10:56:15 AM]:   
[INFO][Bot #1][05/01 10:56:15 AM]:   
[INFO][Bot #1][05/01 10:56:15 AM]:   
[INFO][Bot #1][05/01 10:56:15 AM]: / Pathfinding error, source: [x=2756, y=3478, z=0] and target: [x=2840, y=10127, z=0], report this to Czar immediately!
[INFO][Bot #1][05/01 10:56:15 AM]: Script has been paused.
[INFO][Bot #1][05/01 10:56:15 AM]: Path 3 (Start: [x=2757, y=3477, z=0] and path to: [x=2780, y=10161, z=0]) failed!
[INFO][Bot #1][05/01 10:56:15 AM]:   
[INFO][Bot #1][05/01 10:56:15 AM]:  -- 
[INFO][Bot #1][05/01 10:56:15 AM]:   



EDIT:

Had to literally walk to the blast furnace.
Cant type coin amount for coffer. 
GE doesnt work: Current amount is: [194], should be: [1]
Will do nothing after GE even if done by hand. 
Wont go back to furnace walking instead it tries banking :
[INFO][Bot #1][05/01 11:44:24 AM]: Added al-kharid gate (payment)
[INFO][Bot #1][05/01 11:44:24 AM]: Added 11500 nodes to graph in [3391ms].
[INFO][Bot #1][05/01 11:44:24 AM]: go bank 1
[INFO][Bot #1][05/01 11:44:24 AM]: Going to bank now! null | null
[INFO][Bot #1][05/01 11:44:30 AM]: go bank 1
[INFO][Bot #1][05/01 11:44:30 AM]: Going to bank now! null | null
[INFO][Bot #1][05/01 11:44:31 AM]: Script Perfect Blast Furnace has paused!




I dont think I did anything wrong but yeah so far Im quite sad .-. Works great if you stock millions staying inside the blast furnace


EDIT: 

I see a big issue, it starts typing 1 through the runs and eventually presses enter resulting in something like "111111111111 111111111111" in chat. 
I already seen a few other bots while babysitting doing the same thing RIP :S

Edited by overboardsea123s
  • Like 1
Link to comment
Share on other sites

3 hours ago, Czar said:

I will make some tweaks for questing teleports, smithing, and coffer input. However for the dialogue, click the option which says 'Never ask again' so it won't require you to click '11111' in the text input.

Thanks.

I currently lost 4 accounts within 18 hours, Ill see if its simply the 111 issue that corrects this. 

Im really hoping Im doing something wrong that messes with it xD Are tehre any other tips or suggestions for this?

  • Like 1
Link to comment
Share on other sites

New Update (v60)

- GE mode is working again
- Added a few fail-safes
- Added hotkeys for hiding paint and pausing the script, F1 = pause/resume, F2 = hide paint

Update will automatically go live within 24 hours, gl guys :D 

Preview:

(Notice the beginning, the script enters wrong amount then correct amount, script will not let anything bad happen!! :D)

https://i.imgur.com/R8uTcvT.gif

Edited by Czar
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...