Perfect Stronghold AIO

[Skihero69]

Got banned this morning. gf. I think its cause of that reddit post that called out Jagex for not doing enough against bots on the weekend. I was botting at minotaurs for maybe 4-5 hours but i was at the computer the whole time, typing in clan chat, talking to people around me while the bot ran (this is how i normally bot anyway, cba with clicking) So I'm very human like but still got banned.

 

After running this script for over 50 hours, I have noticed some glitches and some things that could be improved. Idk how to code so i can't tell you how to do it but i think your script could use some cleaning up.

 

when it runs to stronghold from Varrock West bank, it goes south of the fence by gertrudes house almost every time which increases travel time from banking.

 

Another thing, at giant spiders if they are still aggressive it will still attack other spiders which decreases xp rates because you get that message you're already in combat and it spam clicks sometimes before realizing which spider is attacking it.

 

 

I still plan on using this script, ill just have to be more careful somehow. 

 

At Minotaurs, sometimes it attacks one, kills it, then clicks the middle of the room on the minimap and runs there before attacking another one.

[Czar]

Thanks for the feedback, will make some more changes and some more unpredictable nodes for the behavior of the bot, some of those you mentioned were placed for extra antiban but I will randomize it more so it's more unique

[skullckrusher]

One thing i have noticed if you are using death walk is that it get stuck at draynor manor's trees.

[scrubkin2013]

Trial please good sir!

[Czar]

Added a quick update for the draynor tree thing, it should walk left/right to avoid bugging out  

 

Some more nice updates will be placed today, glad you are enjoying the script guys :D

[Powerful]

Added a quick update for the draynor tree thing, it should walk left/right to avoid bugging out

 

Some more nice updates will be placed today, glad you are enjoying the script guys

At Draynor Manor it doesnt stop walking from point A to B, A to B, A to B, please fix

[Czar]

Posted an update for deathwalking: Version 0.1

 

update will be registered within a few hours, thanks for feedback and good luck ;)

[Cookie Monstaaa]

Hi czar i love your scripts btw they are brilliant!... but recently ive been having a issue with this one!. The bot can run some days fine! and then today the bot will walk from stronghold to edge bank and then it gets lost/stuck by the edgevile yews and sits there?. Im using mirror mode btw?

 

UPDATE!:

The script is bugging out every run from the stronghold to the bank at edgevile and logs out but never in. this is going to create a high ban rate

 

UPDATE AGAIN 19:17PM

[FFA2] Fighting target at [x=1880, y=5219, z=0]
R is too different, moving camera to: 284
[FFA1] Fighting target at [x=1880, y=5217, z=0]
[FFA1] Fighting target at [x=1878, y=5217, z=0]
[FFA1] Fighting target at [x=1874, y=5212, z=0]
start = 48.0
result = 24.0
start = 48.0
result = 2.4000000000000004
Next eat hitpoints: [26]
start = 48.0
result = 24.0
start = 48.0
result = 2.4000000000000004
Next eat hitpoints: [26]
start = 48.0
result = 24.0
start = 48.0
result = 2.4000000000000004
Next eat hitpoints: [26]
[FFA1] Fighting target at [x=1874, y=5212, z=0]
[FFA1] Fighting target at [x=1873, y=5213, z=0]
[FFA1] Fighting target at [x=1875, y=5215, z=0]
start = 48.0
result = 24.0
start = 48.0
result = 2.4000000000000004
Next eat hitpoints: [26]
start = 48.0
result = 24.0
start = 48.0
result = 2.4000000000000004
Next eat hitpoints: [26]
start = 48.0
result = 24.0
start = 48.0
result = 2.4000000000000004
Next eat hitpoints: [26]
[FFA1] Fighting target at [x=1874, y=5214, z=0]
[FFA1] Fighting target at [x=1873, y=5213, z=0]
[FFA1] Fighting target at [x=1877, y=5218, z=0]
[FFA1] Fighting target at [x=1875, y=5214, z=0]
[FFA1] Fighting target at [x=1873, y=5213, z=0]
[FFA1] Fighting target at [x=1876, y=5215, z=0]
[FFA1] Fighting target at [x=1875, y=5214, z=0]
[FFA1] Fighting target at [x=1874, y=5216, z=0]
[FFA1] Fighting target at [x=1873, y=5217, z=0]
start = 48.0
result = 24.0
start = 48.0
result = 2.4000000000000004
Next eat hitpoints: [26]
[FFA1] Fighting target at [x=1877, y=5215, z=0]
[FFA1] Fighting target at [x=1874, y=5214, z=0]
[FFA1] Fighting target at [x=1875, y=5215, z=0]
[FFA1] Fighting target at [x=1875, y=5217, z=0]
[FFA1] Fighting target at [x=1875, y=5214, z=0]
[FFA1] Fighting target at [x=1875, y=5215, z=0]
start = 48.0
result = 24.0
start = 48.0
result = 2.4000000000000004
Next eat hitpoints: [26]
start = 48.0
result = 24.0
start = 48.0
result = 2.4000000000000004
Next eat hitpoints: [26]
Entrance found [sTRONGHOLD_ENTRANCE]
[MAPGRAPH] 2 Found an entrance: STRONGHOLD_ENTRANCE for [x=3094, y=3495, z=0]
Obstacle exists [Gate of War]
Entrance found [sTRONGHOLD_ENTRANCE]
[MAPGRAPH] 2 Found an entrance: STRONGHOLD_ENTRANCE for [x=3094, y=3495, z=0]
Obstacle exists [Gate of War]
Entrance found [sTRONGHOLD_ENTRANCE]
[MAPGRAPH] 2 Found an entrance: STRONGHOLD_ENTRANCE for [x=3094, y=3495, z=0]
Obstacle exists [Gate of War]
Entrance found [sTRONGHOLD_ENTRANCE]
Entrance found [sTRONGHOLD_ENTRANCE]
Entrance found [sTRONGHOLD_ENTRANCE]
Pipe detected - splitting message...
Entrance found [sTRONGHOLD_ENTRANCE]
Entrance found [sTRONGHOLD_ENTRANCE]
[MAPGRAPH] 2 Found an entrance: STRONGHOLD_ENTRANCE for [x=3094, y=3495, z=0]
Entrance found [sTRONGHOLD_ENTRANCE]
[MAPGRAPH] 2 Found an entrance: STRONGHOLD_ENTRANCE for [x=3094, y=3495, z=0]
Entrance found [sTRONGHOLD_ENTRANCE]
[MAPGRAPH] 2 Found an entrance: STRONGHOLD_ENTRANCE for [x=3094, y=3495, z=0]
Entrance found [sTRONGHOLD_ENTRANCE]
[MAPGRAPH] 2 Found an entrance: STRONGHOLD_ENTRANCE for [x=3094, y=3495, z=0]
Entrance found [sTRONGHOLD_ENTRANCE]
[MAPGRAPH] 2 Found an entrance: STRONGHOLD_ENTRANCE for [x=3094, y=3495, z=0]
Entrance found [sTRONGHOLD_ENTRANCE]
[MAPGRAPH] 2 Found an entrance: STRONGHOLD_ENTRANCE for [x=3094, y=3495, z=0]
Entrance found [sTRONGHOLD_ENTRANCE]
[MAPGRAPH] 2 Found an entrance: STRONGHOLD_ENTRANCE for [x=3094, y=3495, z=0]
Entrance found [sTRONGHOLD_ENTRANCE]
[MAPGRAPH] 2 Found an entrance: STRONGHOLD_ENTRANCE for [x=3094, y=3495, z=0]
Obstacle exists [Gate of War]
Entrance found [sTRONGHOLD_ENTRANCE]
[MAPGRAPH] 2 Found an entrance: STRONGHOLD_ENTRANCE for [x=3094, y=3495, z=0]
Obstacle exists [Gate of War]
Entrance found [sTRONGHOLD_ENTRANCE]
[MAPGRAPH] 2 Found an entrance: STRONGHOLD_ENTRANCE for [x=3094, y=3495, z=0]
Obstacle exists [Gate of War]
Entrance found [sTRONGHOLD_ENTRANCE]
[MAPGRAPH] 2 Found an entrance: STRONGHOLD_ENTRANCE for [x=3094, y=3495, z=0]
Obstacle exists [Gate of War]
Obstacle exists [Gate of War]
Entrance found [sTRONGHOLD_ENTRANCE]
[MAPGRAPH] 2 Found an entrance: STRONGHOLD_ENTRANCE for [x=3094, y=3495, z=0]
Obstacle exists [Gate of War]
Obstacle exists [Gate of War]
Entrance found [sTRONGHOLD_ENTRANCE]
Entrance found [sTRONGHOLD_ENTRANCE]
Pipe detected - splitting message...
Entrance found [sTRONGHOLD_ENTRANCE]
Entrance found [sTRONGHOLD_ENTRANCE]
[MAPGRAPH] 2 Found an entrance: STRONGHOLD_ENTRANCE for [x=3094, y=3495, z=0]
Entrance found [sTRONGHOLD_ENTRANCE]
[MAPGRAPH] 2 Found an entrance: STRONGHOLD_ENTRANCE for [x=3094, y=3495, z=0]
Entrance found [sTRONGHOLD_ENTRANCE]
[MAPGRAPH] 2 Found an entrance: STRONGHOLD_ENTRANCE for [x=3094, y=3495, z=0]   

===========================================================================

THIS COUNTINUES AFTER HELPING HAND

path size is 0 rip
[MAPGRAPH] 1 Found an entrance: STRONGHOLD_ENTRANCE for [x=1876, y=5217, z=0]
path size is 0 rip
[MAPGRAPH] 1 Found an entrance: STRONGHOLD_ENTRANCE for [x=1876, y=5217, z=0]
path size is 0 rip
[MAPGRAPH] 1 Found an entrance: STRONGHOLD_ENTRANCE for [x=1876, y=5217, z=0]
path size is 0 rip
[MAPGRAPH] 1 Found an entrance: STRONGHOLD_ENTRANCE for [x=1876, y=5217, z=0]
path size is 0 rip
[MAPGRAPH] 1 Found an entrance: STRONGHOLD_ENTRANCE for [x=1876, y=5217, z=0]
 

 

Edited January 27, 2016 by Cookie Monstaaa

[scrubkin2013]

Well, I'm a giant dumbass. I was using this script yesterday which accesses the bank. However, I have a pin pending on the account so when you visit the bank for the first time in that world/login session it asks you to select that you did indeed request a bank pin. The bot is not aware of this window screen, thus my bot got stuck trying to access the bank for a good 7-8 hours. Yes, the argument could be why did you run it for 7-8 hours? Well, tbh czar has wonderful scripts and I have no issue with getting banned. Just a little heads up for everyone so you don't under go the same issue that I did. 

 

Bot Busting Ban(Moderate) account will be accessible again in 2 days.

 

Edit: Czar if you would be able to add this into the script to not run into this issue I will gladly let you use my account so you can code it to do so. Then again you could just do this on a level 3 account or your own. Figured I would offer. 

Edited January 27, 2016 by scrubkin2013

[easy98]

Im running off the ankous script and it clicks on ankous every second or so. Is this because its now a stronghold script and does not support the ankous? Please help

Edited January 27, 2016 by easy98

[Cookie Monstaaa]

so ive been bot sitting the bot because it simply cant be trusted to do its job when banking, the script is flawless in the spiders and walking from the bank!. but every damn time it walks from the stronghold to edgevile bank it gets stuck here!!!! :@:@:@:@:@:@:@:@:@:@:@:@:@

[Czar]

@scrubkin did you enter the bank pin upon adding a new account in the bot client account manager? here is a screenshot:

 

 

If so, confirm it and I will speak to the developers so they can add bank pin event solver ASAP, so sorry about that dude and thanks so much for the kind words

 

@easy98 it supports ankous 100% just make sure you enable food. If you enable safespot it will automatically go to the south ankou area because there is only 1 safespot in the entire ankou area

 

@cookie monstaa pathfinding update coming up, apologies for that, the update should be here within an hour or so

 

edit: I can't seem to make the bug happen, it is walking to bank perfectly fine  seems that mirror mode is the fault here

Edited January 28, 2016 by Czar

[Cookie Monstaaa]

 

 

@cookie monstaa pathfinding update coming up, apologies for that, the update should be here within an hour or so

 

edit: I can't seem to make the bug happen, it is walking to bank perfectly fine  seems that mirror mode is the fault here

 

==============================================

@czar yes i see what you mean?... it could very well be the mirror mode client?, it still is in beta testing is it not?. Is stealth mode injected riskier would you say?

[scrubkin2013]

@scrubkin did you enter the bank pin upon adding a new account in the bot client account manager? here is a screenshot:

 

 

If so, confirm it and I will speak to the developers so they can add bank pin event solver ASAP, so sorry about that dude and thanks so much for the kind words

 

@easy98 it supports ankous 100% just make sure you enable food. If you enable safespot it will automatically go to the south ankou area because there is only 1 safespot in the entire ankou area

 

@cookie monstaa pathfinding update coming up, apologies for that, the update should be here within an hour or so

 

edit: I can't seem to make the bug happen, it is walking to bank perfectly fine  seems that mirror mode is the fault here

Yes, I did have a bank pin entered.

[Cookie Monstaaa]

@Czar its all sorted banking and web walking is fine now since they patched the client!, thank you very much you are a great scripter