This script will has been disabled due the availability of an improved version.

Click the link below to visit the thread:

http://osbot.org/forum/topic/91362-rq-chopper-woodcutting-as-it-should-be/

 

 

 

Update 1.1:

• Updated to API 2.4.29
• Depreciated localwalker from 2.4.25 methods replaced by webwalker
• Magic tree cutting added (range guild near seers village)
• Random chat toggle added (When above lvl 35, will chat a random message when nearly leveling up -> e.g. "Almost lvl 42")
• More proper display of state messages
• Improved fail detection

Not available for download anymore, see the new version: http://osbot.org/forum/topic/91362-rq-chopper-woodcutting-as-it-should-be/

 

 

 

 

 

 

 

Original thread (version 1.0)

Information:

However I'm fairly experienced with Java, I'm very knew to bot scripting and the OSBOT API.

I might not be using it in it's best ways yet as Ive only been working with it for barely a week.

This is my first script from scratch and I've tested and tweaked it for hours.

But of course there will probably be some bugs around, that's always the case with new written stuff.

So if you find any let me know.

 

 

Howto:

This bot has a simple GUI where you choose your location and whether you want to powerchop or bank.

Start the bot when at a woodcutting location or at the closest bank.

Lay back and relax.

 

 

About:

Supports all axes and auto-toggles running.

• Banking & Powerchopping
• Locations
• Random actions
• Trackers

 

Banking & Powerchopping:

• Supports powerchopping (dropping full inventory)
• Supports banking for all locations

 

Locations:

• Seers village: Yews
• Seers village: Maple
• Seers village: Willow
• Draynor village: Willow
• Edgeville: Yew
• Varrock palace: Yew
• Grand Exchange: Oak
• Varrock West: Oak
• Varrock East: Normal

 

Random actions:

• Skill hovering
• Opening random tab
• Randomly moving mouse
• Moving mouse outside screen
• Random delay
• Random "almost lvl x" message [Currently disabled]

 

Trackers:

• Current level + levels gained
• Experience gained + Experience / hour
• Next level in (time) + Experience TNL
• Running time
• State status
• Action

 

 

Version 1.0

Click here to download the Script jar

Put the jar in "your home folder/OSBOT/Scripts/"

 

 

Any feedback is appreciated.

Edited February 8, 20169 yr by lisabe96

 

 

 

Information:

However I'm fairly experienced with Java, I'm very knew to bot scripting and the OSBOT API.

I might not be using it in it's best ways yet as Ive only been working with it for barely a week.

This is my first script from scratch and I've tested and tweaked it for hours.

But of course there will probably be some bugs around, that's always the case with new written stuff.

So if you find any let me know.

 

 

About:

• Banking & Powerchopping
• Locations
• Random actions
• Trackers

 

Banking & Powerchopping:

• Supports powerchopping (dropping full inventory)
• Supports banking for all locations

 

Locations:

• Seers village: Yews
• Seers village: Maple
• Seers village: Willow
• Draynor village: Willow
• Edgeville: Yew
• Varrock palace: Yew
• Grand Exchange: Oak
• Varrock West: Oak
• Varrock East: Normal

 

Random actions:

• Skill hovering
• Opening random tab
• Randomly moving mouse
• Moving mouse outside screen
• Random delay
• Random "almost lvl x" message [Currently disabled]

 

Trackers:

• Current level + levels gained
• Experience gained + Experience / hour
• Next level in (time) + Experience TNL
• Running time
• State status
• Action

 

 

 

 

Click here to download the script jar

 

 

Help me:

One thing I haven't been able to figure out yet is how to add a logo.

Where do I put the image file and what path do I specify in the script manifest?

Thanks in advance if anybody could point me to that.

 

Any feedback is appreciated.

 

upload your logo to imgur and put the link in the script manifest.

upload your logo to imgur and put the link in the script manifest.

Haha damn I didn't know it would be that simple, was expecting I had to put it in resources or something.

Thanks mate

 

updated with logo

Edited January 1, 201610 yr by lisabe96

Updated to 1.1 (See top of thread for details)

Works Great, been using it already for hours !

 

Thx

Hey, This improvement would be great. 

 

For example when cutting yews, when one tree goes down, then 2nd, then 3rd, it would walk to the 1st tree stump and wait untill the tree re-spawns there, not waiting on the 3rd tree stump.

If that makes sense.

 

+ Great release.

 

Edit: Seems to be relatively large file... 

Edited January 3, 201610 yr by tomimikaelll

Hey, This improvement would be great. 

 

For example when cutting yews, when one tree goes down, then 2nd, then 3rd, it would walk to the 1st tree stump and wait untill the tree re-spawns there, not waiting on the 3rd tree stump.

If that makes sense.

 

+ Great release.

 

Edit: Seems to be relatively large file... 

Well OSBOT API is 5.x MB so yeah, can't get it smaller that way.

And I understand what you mean, will look into your suggestion when I'm back at woodcutting.

(I basically make scripts for what I'm training myself at the moment)

Nice release , but there are a lot of bugs in seers village yews.

Nice release , but there are a lot of bugs in seers village yews.

Very plausible because:

• This was my first script
• I haven't gotten bugs reported so can't fix what I don't know
• I'm not member and used RSPS to get the data in member area's

 

So feel free to post the bugs

Looks good gunna have to try it out

Hello! I was testing this out at Edgeville yews and it seems to have an issue with the pathing. It will cut a full load of yews, bank, and then return (or get stuck on the door) and sit there, until it logs out. Thanks!

Hello! I was testing this out at Edgeville yews and it seems to have an issue with the pathing. It will cut a full load of yews, bank, and then return (or get stuck on the door) and sit there, until it logs out. Thanks!

Is there a door at edge yews? 

 

This script hasn't been kept up to date as it was my first one.

I'm much more advanced at using the API now and this script lacks a lot.

I will be writing a new woodcutter in the near future so keep an eye on that.

Is there a door at edge yews? 

 

This script hasn't been kept up to date as it was my first one.

I'm much more advanced at using the API now and this script lacks a lot.

I will be writing a new woodcutter in the near future so keep an eye on that.

lol yeah, there is a door. Also, I took a picture of where it gets hung up at at. I'm looking forward to another one of your scripts! 

 

lol yeah, there is a door. Also, I took a picture of where it gets hung up at at. I'm looking forward to another one of your scripts! 

 

 

I got myself a member account yesterday and some gold so I can gather P2P data where I had to use RSPS for that up to now.

Will be handy for seers & such, might get started tonight on it already as my other scripts I had planned are finished

This script will be disabled very soon due an improved version which will be released soon here:

http://osbot.org/forum/topic/91362-rq-chopper-woodcutting-as-it-should-be/

 

Edited January 25, 201610 yr by lisabe96