Jump to content

Perfect Motherlode Miner


Czar

Recommended Posts

The script starts of fine the when it goes to deposit it and it gets the message 'the machine will need repaired' it just stands there and does nothing?? im confused.

 

Make sure to have hammer in your inventory, or go to a highly populated world (where other people will fix)

 

hey i was wondering if i could request a trial for this please smile.png

 

Done, good luck ! :D 24 hours

 

I've been using this for about 2weeks and I say this, this has to be my favorite script out there its flawless all you need is a hammer and a pickaxe just make sure all gave a hammer witchu or else you finna get an error or sommit goodjob czar

 

thanks for the feedback :D :D

  • Like 1
Link to comment
Share on other sites

Mines rock slide and then waits. Mines rock slide. Waits.... Continues to loop. I'm using mirror mode.

 

edit3 (last update):
It takes too long to move after mining the rock. Maybe trying to detect if it's path is still blocked? Then it ran to a rock slide that was not in it's way.
 

local [x=3748, y=5674, z=0]
Obstacle exists [Rockfall]
true 2.1 ?? [x=3748, y=5674, z=0]
local [x=3748, y=5674, z=0]
Obstacle exists [Rockfall]
false 2.1 ?? [x=3748, y=5674, z=0]
local [x=3748, y=5674, z=0]
originalwalk!: [x=3768, y=5650, z=0]
local [x=3748, y=5674, z=0]
true 2.1 ?? [x=3748, y=5674, z=0]
local [x=3748, y=5674, z=0]
Obstacle exists [Rockfall]
false 2.1 ?? [x=3748, y=5674, z=0]
Obstacle exists [Rockfall]
wp_mm_success [x=3761, y=5652, z=0] generated...
Obstacle exists [Rockfall]
wp_mm_success [x=3759, y=5659, z=0] generated...
local [x=3748, y=5674, z=0]
Obstacle exists [Rockfall]
false 2.1 ?? [x=3748, y=5674, z=0]
Obstacle exists [Rockfall]
wp_mm_success [x=3761, y=5652, z=0] generated...
local [x=3748, y=5674, z=0]

edit2:
Possibly a problem with windows. Will update

 

edit:
Now it runs back and forth.

se 2.1 ?? [x=3748, y=5674, z=0]
wp_mm_success [x=3723, y=5682, z=0] generated...
Walking to next source: [x=3728, y=5687, z=0] ... 
local [x=3748, y=5674, z=0]
true 2.1 ?? [x=3748, y=5674, z=0]
local [x=3748, y=5674, z=0]
true 2.1 ?? [x=3748, y=5674, z=0]
local [x=3748, y=5674, z=0]
true 2.1 ?? [x=3748, y=5674, z=0]
local [x=3748, y=5674, z=0]
Obstacle exists [Rockfall]
true 2.1 ?? [x=3748, y=5674, z=0]
local [x=3748, y=5674, z=0]
Obstacle exists [Rockfall]
true 2.1 ?? [x=3748, y=5674, z=0]
local [x=3748, y=5674, z=0]
Obstacle exists [Rockfall]
true 2.1 ?? [x=3748, y=5674, z=0]
local [x=3748, y=5674, z=0]
Obstacle exists [Rockfall]
true 2.1 ?? [x=3748, y=5674, z=0]
local [x=3748, y=5674, z=0]
can reach [x=3722, y=5673, z=0]
true 2.1 ?? [x=3748, y=5674, z=0]
local [x=3748, y=5674, z=0]
true 2.1 ?? [x=3748, y=5674, z=0]
local [x=3748, y=5674, z=0]
true 2.1 ?? [x=3748, y=5674, z=0]
local [x=3748, y=5674, z=0]
true 2.1 ?? [x=3748, y=5674, z=0]
local [x=3748, y=5674, z=0]


stuck again:

local [x=3767, y=5651, z=0]
Obstacle exists [Rockfall]
true 2.1 ?? [x=3767, y=5651, z=0]
local [x=3767, y=5651, z=0]
local [x=3767, y=5651, z=0]
Obstacle exists [Rockfall]
true 2.1 ?? [x=3768, y=5653, z=0]
local [x=3767, y=5651, z=0]
local [x=3767, y=5651, z=0]
Obstacle exists [Rockfall]
true 2.1 ?? [x=3766, y=5649, z=0]
local [x=3767, y=5651, z=0]
local [x=3767, y=5651, z=0]
Obstacle exists [Rockfall]
true 2.1 ?? [x=3768, y=5651, z=0]
local [x=3767, y=5651, z=0]
local [x=3767, y=5651, z=0]
Obstacle exists [Rockfall]
true 2.1 ?? [x=3766, y=5649, z=0]
local [x=3767, y=5651, z=0]
Edited by Blank22
Link to comment
Share on other sites

 

Mines rock slide and then waits. Mines rock slide. Waits.... Continues to loop. I'm using mirror mode.

 

edit3 (last update):

It takes too long to move after mining the rock. Maybe trying to detect if it's path is still blocked? Then it ran to a rock slide that was not in it's way.

 

local [x=3748, y=5674, z=0]
Obstacle exists [Rockfall]
true 2.1 ?? [x=3748, y=5674, z=0]
local [x=3748, y=5674, z=0]
Obstacle exists [Rockfall]
false 2.1 ?? [x=3748, y=5674, z=0]
local [x=3748, y=5674, z=0]
originalwalk!: [x=3768, y=5650, z=0]
local [x=3748, y=5674, z=0]
true 2.1 ?? [x=3748, y=5674, z=0]
local [x=3748, y=5674, z=0]
Obstacle exists [Rockfall]
false 2.1 ?? [x=3748, y=5674, z=0]
Obstacle exists [Rockfall]
wp_mm_success [x=3761, y=5652, z=0] generated...
Obstacle exists [Rockfall]
wp_mm_success [x=3759, y=5659, z=0] generated...
local [x=3748, y=5674, z=0]
Obstacle exists [Rockfall]
false 2.1 ?? [x=3748, y=5674, z=0]
Obstacle exists [Rockfall]
wp_mm_success [x=3761, y=5652, z=0] generated...
local [x=3748, y=5674, z=0]

edit2:

Possibly a problem with windows. Will update

 

edit:

Now it runs back and forth.

se 2.1 ?? [x=3748, y=5674, z=0]
wp_mm_success [x=3723, y=5682, z=0] generated...
Walking to next source: [x=3728, y=5687, z=0] ... 
local [x=3748, y=5674, z=0]
true 2.1 ?? [x=3748, y=5674, z=0]
local [x=3748, y=5674, z=0]
true 2.1 ?? [x=3748, y=5674, z=0]
local [x=3748, y=5674, z=0]
true 2.1 ?? [x=3748, y=5674, z=0]
local [x=3748, y=5674, z=0]
Obstacle exists [Rockfall]
true 2.1 ?? [x=3748, y=5674, z=0]
local [x=3748, y=5674, z=0]
Obstacle exists [Rockfall]
true 2.1 ?? [x=3748, y=5674, z=0]
local [x=3748, y=5674, z=0]
Obstacle exists [Rockfall]
true 2.1 ?? [x=3748, y=5674, z=0]
local [x=3748, y=5674, z=0]
Obstacle exists [Rockfall]
true 2.1 ?? [x=3748, y=5674, z=0]
local [x=3748, y=5674, z=0]
can reach [x=3722, y=5673, z=0]
true 2.1 ?? [x=3748, y=5674, z=0]
local [x=3748, y=5674, z=0]
true 2.1 ?? [x=3748, y=5674, z=0]
local [x=3748, y=5674, z=0]
true 2.1 ?? [x=3748, y=5674, z=0]
local [x=3748, y=5674, z=0]
true 2.1 ?? [x=3748, y=5674, z=0]
local [x=3748, y=5674, z=0]


stuck again:

local [x=3767, y=5651, z=0]
Obstacle exists [Rockfall]
true 2.1 ?? [x=3767, y=5651, z=0]
local [x=3767, y=5651, z=0]
local [x=3767, y=5651, z=0]
Obstacle exists [Rockfall]
true 2.1 ?? [x=3768, y=5653, z=0]
local [x=3767, y=5651, z=0]
local [x=3767, y=5651, z=0]
Obstacle exists [Rockfall]
true 2.1 ?? [x=3766, y=5649, z=0]
local [x=3767, y=5651, z=0]
local [x=3767, y=5651, z=0]
Obstacle exists [Rockfall]
true 2.1 ?? [x=3768, y=5651, z=0]
local [x=3767, y=5651, z=0]
local [x=3767, y=5651, z=0]
Obstacle exists [Rockfall]
true 2.1 ?? [x=3766, y=5649, z=0]
local [x=3767, y=5651, z=0]

Im having the same issue. Mines the rockfall doesnt move or doesnt detect the next run and ends up moving backwards.

Link to comment
Share on other sites

Just posted a quick update, should be live within an hour or so, version 0.40, good luck all smile.png

 

EDIT: Make sure to use the latest mirror mode client, because I have not made changes prior to this update regarding any movement code

 

that's if you are using mirror mode ^

 

 
EDIT2: Works like a charm, going for coal and gem bags on my new account tongue.png
 
the journey begins from 36-80 mining 
 
19d5626c63a830ac6d49ede2297e367d.png
Edited by Czar
Link to comment
Share on other sites

It recognizes rockfalls 100% , but if you are using mirror mode you need to decrease the reaction so it can detect them faster ;)

 

As for normal osbot client (without mirror mode) it works beautifully. With mirror mode you just need to make the reaction time faster (hit SHIFT + F4) and it will work better :)

 

@Danzy I can add support for multiple trips, that's a good suggestion for this bot :D

Link to comment
Share on other sites

It recognizes rockfalls 100% , but if you are using mirror mode you need to decrease the reaction so it can detect them faster wink.png

 

As for normal osbot client (without mirror mode) it works beautifully. With mirror mode you just need to make the reaction time faster (hit SHIFT + F4) and it will work better smile.png

 

@Danzy I can add support for multiple trips, that's a good suggestion for this bot biggrin.png

Ok thanks Czar I will give it a go

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...