ok three things:

 

1st - thanks for the awesome script, I know it's great, if only I could use it...

 

Leads me to number 2 - I've got the folders installed correctly, about 5 folders of your different scripts within my scripts folder, so file path is correct.

When I go to run the script, I select oak logs and click start and the GUI doesn't go anywhere and all that happens is I receive the message

 

" DEBUG:Set plank type: Oak" in the command line of my OSbot client. I could spam click the GUI start button and all that happens is my command line becomes filled with the above message, over and over again.

 

Edit: so just to be clear, the GUI stays up after I click start, and the script is running but not doing anything, only idling.

 

3rd - just to help others install the script...if one follows your directions literally and does not do anything else, a folder called "fir3 scripts" is created in the "scripts" folder; this "fir3 scripts" folder contains the other 5 folders for your scripts...I think this is where everyone is having trouble with installation.

 

All I had to do was cut-paste the 5 folders directly into the scripts folder and they *theoretically* worked, except I'm having trouble with that problem stated above.

 

Let me know what you think about this problem/how i can fix it, or if it's on your side of things. I'm going to keep playing around with it and see what happens

 

Same thing happens to me

Thank you for bringing this to my attention guys! I will be looking into this tonight or tomorrow, it is likely due to some recent changes in FireBot. I will get these problems resolved ASAP for you gentlemen and let you know when it's ready. Sorry for the inconvenience, but thank you for your understanding.

Thank you for bringing this to my attention guys! I will be looking into this tonight or tomorrow, it is likely due to some recent changes in FireBot. I will get these problems resolved ASAP for you gentlemen and let you know when it's ready. Sorry for the inconvenience, but thank you for your understanding.

Cheers 

Well I'm standing in Varrock and the bank with coins and logs in my inventory but it doesn't seem to wanna run... 

 

[INFO ][09/01/13 09:12:28 PM]: Started script : Fir3 PlankAny v0.10
[INFO ][09/01/13 09:12:28 PM]: Retreiving item from zybez.
[INFO ][09/01/13 09:12:30 PM]: DEBUG: Set Plank Type: Oak
[INFO ][09/01/13 09:12:40 PM]: DEBUG: Set Plank Type: Oak
[INFO ][09/01/13 09:13:02 PM]: DEBUG: Set Plank Type: Oak

 

Well I'm standing in Varrock and the bank with coins and logs in my inventory but it doesn't seem to wanna run... 

[INFO ][09/01/13 09:12:28 PM]: Started script : Fir3 PlankAny v0.10
[INFO ][09/01/13 09:12:28 PM]: Retreiving item from zybez.
[INFO ][09/01/13 09:12:30 PM]: DEBUG: Set Plank Type: Oak
[INFO ][09/01/13 09:12:40 PM]: DEBUG: Set Plank Type: Oak
[INFO ][09/01/13 09:13:02 PM]: DEBUG: Set Plank Type: Oak

 

Known issue now. You can refer to the posts above. I will be updating it tonight or tomorrow at the latest with a fix for this. Sorry for the inconvenience.

 

 

Well I'm standing in Varrock and the bank with coins and logs in my inventory but it doesn't seem to wanna run... 

[INFO ][09/01/13 09:12:28 PM]: Started script : Fir3 PlankAny v0.10
[INFO ][09/01/13 09:12:28 PM]: Retreiving item from zybez.
[INFO ][09/01/13 09:12:30 PM]: DEBUG: Set Plank Type: Oak
[INFO ][09/01/13 09:12:40 PM]: DEBUG: Set Plank Type: Oak
[INFO ][09/01/13 09:13:02 PM]: DEBUG: Set Plank Type: Oak

 

Known issue now. You can refer to the posts above. I will be updating it tonight or tomorrow at the latest with a fix for this. Sorry for the inconvenience.

 

 

Alright, thank you can't wait for it!

Just to keep you guys in the loop, I have looked into this problem and resolved it. I have a major FireBot update pending that can only be pushed once FishAny is updated to use my new architecture. Needless to say, it will be easier for me to wait until I am done with the FireBot update to push the update for PlankAny. I will be out tonight, so there is only a chance I will get it done tonight. Otherwise you can expect it tomorrow. Sorry for the delay.

Just to keep you guys in the loop, I have looked into this problem and resolved it. I have a major FireBot update pending that can only be pushed once FishAny is updated to use my new architecture. Needless to say, it will be easier for me to wait until I am done with the FireBot update to push the update for PlankAny. I will be out tonight, so there is only a chance I will get it done tonight. Otherwise you can expect it tomorrow. Sorry for the delay.

Thank you can't wait!

Just to keep you guys in the loop, I have looked into this problem and resolved it. I have a major FireBot update pending that can only be pushed once FishAny is updated to use my new architecture. Needless to say, it will be easier for me to wait until I am done with the FireBot update to push the update for PlankAny. I will be out tonight, so there is only a chance I will get it done tonight. Otherwise you can expect it tomorrow. Sorry for the delay.

 

Thank you, I've got the time since I know it'll be a quality Script!

In the meantime guys, you can always update the SVN to the revision which the planker was working with. I for one don't know which revision that was, but maybe you will or you can use trial and error. 

 

Top update to a specific revision Right click within your scripts folder

TortoiseSVN > Update to Revision

 

This should be a temporary fix until BFir3 releases the updates to FireBot.

For the people wondering which revision is needed, it's 65 at 66 it's broken.

when i click start on that gui, it does nothing...

How to download?

[ERROR][09/13/13 08:17:26 PM]: Failed to start script [Fir3 PlankAny v0.10]

java.lang.reflect.InvocationTargetException

at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)

at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)

at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)

at java.lang.reflect.Constructor.newInstance(Unknown Source)

at org.osbot.script.engine.ScriptManager.startScript(hi:8)

at org.osbot.Lpt2.run(fk:317)

at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source)

at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)

at java.lang.Thread.run(Unknown Source)

Caused by: java.lang.NoClassDefFoundError: fireBot/FireBot

at plankAny.Planker.<init>(Planker.java:50)

... 9 more

Caused by: java.lang.ClassNotFoundException: fireBot.FireBot

at java.net.URLClassLoader$1.run(Unknown Source)

at java.net.URLClassLoader$1.run(Unknown Source)

at java.security.AccessController.doPrivileged(Native Method)

at java.net.URLClassLoader.findClass(Unknown Source)

at java.lang.ClassLoader.loadClass(Unknown Source)

at java.lang.ClassLoader.loadClass(Unknown Source)

... 10 more

 

If this isn't updated within 24 hours, I'll be moving it to the out-dated section.

If you choose to update it after that point, feel free to PM me to re-open the thread.