AP Slayer Guide

Click here to buy!

Click here to visit script thread!

GUI Guide

General Settings:

Screenshot of the General Settings Tab:
 

 
I will break this down into sections:
 
Master Settings:

• Simply select a master on the dropdown menu which you would your character to refer to when getting a new task and other aspects which require a slayer master.

Looting Settings:

• "Use Looting" Tickbox: Tick this if you would like the script to loot.
• "Eat food to make room" Tickbox: Tick this if you would like the script to eat food to make room for loot when fighting.
• "Loot Above Value" [Value Here]: This means the script will calculate the grand exchange price of all ground items and if it above the value entered in the textbox, then it shall be looted (this does take into account stackables and their quantities)

Camp Monster Settings:

• "Use taskless Mode (AIO Fighter)" Tickbox: Ticking this box will mean the script will perform like an AIO Fighter and only fight the monster which you select in the drop down box below meaning you can kill a single monster continuously to maximise XP or GP.
• "Select Monster:" Drop down box: Select which monster you would like to continuously kill (camp) at.

Think of this has performing a single slayer task over and over. So to setup inventory, equipment and other settings please refer to Default & Custom profiles.
 
Health Settings:

•  "Eat Percentage:" Slider: Simply adjust the slider left or right to what HP % the script should eat at.

Potion Settings:

• "Stop drinking when kills left is < X" Slider: So what the script will do is stop drinking when the number of kills left on a task is below the X value. For example if it 10, then when the kills left on a task is below 10, it will no longer drink stat boosting potions to save supplies.

Quick Points Settings:

• "Enable Quick Points Mode" Tickbox:  When ticked, this will complete all 10th and 50th tasks by your selected master in Master Settings and complete all other tasks by Turael, this is another method to maximise points/hr, but not XP

World Hop Settings:

• "Use World Hopping" Tickbox:  When ticked, this will hop worlds if there isn't a available to attack after a given time (to allow if the monster has quick spawns)

Start Button:

• "Start" Button:  When pressed, the script will start and use all the settings that you have entered in the user interface.

Refresh Button:

• "Refresh" Button:  If you want to make changes to the script while it is started, like adjust a safespot without having to restart the script. Just press the refresh button and it will save and update all changes without having to restart

Submit Bug Report Button:

• "Submit Bug Report" Button: This feature is here to help you save time when submitting a bug report on the forum thread, simply follow the steps provided and post the report on the thread which includes many settings which help us as scripters replicate and locate bugs

Default Profile:

Screenshot of Default Profile Tab:



What is this a Profile?
A Profile is assigned to every monster which holds all the important information for a task to be completed. This includes inventory and equipment setups so the script can setup accordingly to effectively complete a Task.

What is this a Default Profile?
A Default Profile is a profile which is used by every monster unless you make changes in the custom profiles (Will be talking about this later)which would override the Deafult Profile, then the Default Profile can be used.
So what you can basically do is load in your default profile and let the script run! (instead of having to fill out every single slayer task profile)

But what if a task has a required item like an anti-dragonfire shield for dragons and it isnt on myDefault Profile?
Some monster have Required Items which will override items in your Default Profile. For example if your setup looks like this:



And you have a dragon task, then the rune defender WILL be replaced with a anti-dragonfire shield. If you do not have a required item then the script will stop.
Other Required items include rope and anti-posions for some tasks, so please leave some space incase these are required in your Default Profile.

What is needed/allowed in a Profile?
We recommend you include some kind of teleport or transportation method items in your inventory like seen above I have a dramen staff to allow me to use fairy rings and I have runes and Air Battlestaff (Yes the webwalker will handle all starves) to teleport to varrock to bank oruse the edgeville fairy ring. Please include a method of checking for a task aswell (Gem or Slayer Helm) and whatever else you may need like potions or food.

Custom Profiles:

Screenshot of Custom Profiles Tab:



What is this a Custom Profile?
So this is where if you don't want a certain task to use the default profile, then you can override it with a custom profile.

Loaded Monsters Section:
You can you use the search bar to search for a specific monster to edit/view or scroll through to find it. Then just clickthe monster you would like to view/edit and it will update the information on the fight hand side of the user interface and so you can make the appropiate changes.

Info Tab:

This Includes information about the monster like:

• Name
• Level
• Masters
• Gear (Whether is it using the Default or Custom Profile)
• Inventory (Whether is it using the Default or Custom Profile)
• Location
• Required Items
• Skip Task

Pick Your Monster:
This allows you to select which level and location of the monster you want to fight, when you press one the selected monster information updates to show the appropiate data.

Edit Inventory Profile:
Allows you make a Custom Inventory Profile for this Monster.

Edit Gear Profile:
Allows you make a Custom Gear Profile for this Monster.

Edit PrayerProfile:
Allows you make a Prayer Profile for this Monster.

Profiles Tab:

Screenshot of Custom Profiles for selected Monster:



This shows the the current custom profile for the inventory and gear setup and allows you to update them if you want to.

SafeSpot + Cannon Tab:

Screenshot of Custom Profiles of a selected monster for the SafeSpot & Cannon Settings:



Safespot Settings:

• "Edit Safe Spot" Button: This feature allows you to set a safespot and to remove it if you no longer need it. Stand in the position which you would like to use as a safespot and press the button use Current Location to set the safe spot location.

Cannon Settings:

• "Edit Cannon Settings" Button: This feature allows you to set a Cannon spot to be deployed and to remove it if you no longer need it. Stand in the position which you would like to deploy your cannon and press the button use Current Location to set the Cannon location.

Advanced Looting:

Screenshot of the looting tab:



This will allow you to loot items which may be below the loot value but are stackable/valuable to you which can be added to also be looted.
(Make sure looting is enabled under the General Settings tab for it to function)

Simply select an lootable item from the list and use the correct arrow to move it to the items to loot list. And if you no longer want it on the loot list then select it and use the appropiate arrow to move it back to the possible items to loot.

Note: Remember to save Loot Lists so it updates!

 

--- Script & Help ---

 

Monster Support:
 

81/89 - 91% Supported
 
*ADDED
*NOT ADDED or SUPPORTED
 
ABERRANT_SPECTRES
ABYSSAL_DEMONS
ANKOU
BANSHEES
BASILISKS
BATS
BEARS
BIRDS
BLACK_DEMONS
BLACK_DRAGONS
BLOODVELD
BLUE_DRAGONS
BRINE_RATS
BRONZE_DRAGONS
CATABLEPON
CAVE_BUGS
CAVE_CRAWLERS
CAVE_HORRORS
CAVE_KRAKENS
CAVE_SLIMES
COCKATRICE
COWS
CRAWLING_HANDS
CROCODILES
CYCLOPS
DAGANNOTH
DARK_BEASTS - (Don't have the requirements)
DESERT_LIZARDS
DOGS
DUST_DEVILS
DWARVES
EARTH_WARRIORS
ELVES - (Don't have the requirements)
FEVER_SPIDERS
FIRE_GIANTS
FLESHCRAWLERS
GARGOYLES
GHOSTS
GHOULS
GOBLINS
GORAKS - (Don't have the requirements)
GREATER_DEMONS
GREEN_DRAGONS
HARPIE_BUG_SWARMS
HELLHOUNDS
HILL_GIANTS
HOBGOBLINS
ICEFIENDS
ICE_GIANTS
ICE_WARRIORS
INFERNAL_MAGES
IRON_DRAGONS
JELLIES
JUNGLE_HORROR
KALPHITE
KILLERWATTS
KURASK
LESSER_DEMONS
MINIONS_OF_SCABARAS - (Don't have the requirements)
MINOTAURS
MITHRIL_DRAGONS
MOGRES
MOLANISKS
MONKEYS
MOSS_GIANTS
NECHRYAEL
OGRES
OTHERWORLDLY_BEINGS
PYREFIENDS
RATS
RED_DRAGONS
ROCKSLUGS
SCORPIONS
SEA_SNAKES
SHADES
SHADOW_WARRIORS
SKELETAL_WYVERNS
SKELETONS
SMOKE_DEVILS
SPIDERS
SPIRITUAL_CREATURES
STEEL_DRAGONS
SUQAHS
TERROR_DOGS
TROLLS
TUROTH
VAMPIRES
WALL_BEASTS
WATERFIENDS
WEREWOLVES
WOLVES
VYREWATCHES
ZOMBIES
ZYGOMITE
 
***Note: If you would like to help add an unsupported Monster, please let me know so we can get them added!****

 

How to Report a Bug:

 

http://osbot.org/forum/topic/92232-%E2%98%85ap-slayer%E2%98%85/page-102#entry1226863

Edited November 19, 20169 yr by Precise

You should put this on the script thread itself.

 

AP Slayer Guide

Click here to buy!

Click here to visit script thread!

GUI Guide

General Settings:

Screenshot of the General Settings Tab:

 

 

I will break this down into sections:

 

Master Settings:

• Simply select a master on the dropdown menu which you would your character to refer to when getting a new task and other aspects which require a slayer master.

Looting Settings:

• "Use Looting" Tickbox: Tick this if you would like the script to loot.
• "Eat food to make room" Tickbox: Tick this if you would like the script to eat food to make room for loot when fighting.
• "Loot Above Value" [Value Here]: This means the script will calculate the grand exchange price of all ground items and if it above the value entered in the textbox, then it shall be looted (this does take into account stackables and their quantities)

Camp Monster Settings:

• "Use taskless Mode (AIO Fighter)" Tickbox: Ticking this box will mean the script will perform like an AIO Fighter and only fight the monster which you select in the drop down box below meaning you can kill a single monster continuously to maximise XP or GP.
• "Select Monster:" Drop down box: Select which monster you would like to continuously kill (camp) at.

Think of this has performing a single slayer task over and over. So to setup inventory, equipment and other settings please refer to Default & Custom profiles.

 

Health Settings:

•  "Eat Percentage:" Slider: Simply adjust the slider left or right to what HP % the script should eat at.

Potion Settings:

• "Stop drinking when kills left is < X" Slider: So what the script will do is stop drinking when the number of kills left on a task is below the X value. For example if it 10, then when the kills left on a task is below 10, it will no longer drink stat boosting potions to save supplies.

Quick Points Settings:

• "Enable Quick Points Mode" Tickbox:  When ticked, this will complete all 10th and 50th tasks by your selected master in Master Settings and complete all other tasks by Turael, this is another method to maximise points/hr, but not XP

World Hop Settings:

• "Use World Hopping" Tickbox:  When ticked, this will hop worlds if there isn't a available to attack after a given time (to allow if the monster has quick spawns)

Start Button:

• "Start" Button:  When pressed, the script will start and use all the settings that you have entered in the user interface.

Refresh Button:

• "Refresh" Button:  If you want to make changes to the script while it is started, like adjust a safespot without having to restart the script. Just press the refresh button and it will save and update all changes without having to restart

Submit Bug Report Button:

• "Submit Bug Report" Button: This feature is here to help you save time when submitting a bug report on the forum thread, simply follow the steps provided and post the report on the thread which includes many settings which help us as scripters replicate and locate bugs

Default Profile:

Screenshot of Default Profile Tab:

What is this a Profile?

A Profile is assigned to every monster which holds all the important information for a task to be completed. This includes inventory and equipment setups so the script can setup accordingly to effectively complete a Task.

What is this a Default Profile?

A Default Profile is a profile which is used by every monster unless you make changes in the custom profiles (Will be talking about this later)which would override the Deafult Profile, then the Default Profile can be used.

So what you can basically do is load in your default profile and let the script run! (instead of having to fill out every single slayer task profile)

But what if a task has a required item like an anti-dragonfire shield for dragons and it isnt on myDefault Profile?

Some monster have Required Items which will override items in your Default Profile. For example if your setup looks like this:

And you have a dragon task, then the rune defender WILL be replaced with a anti-dragonfire shield. If you do not have a required item then the script will stop.

Other Required items include rope and anti-posions for some tasks, so please leave some space incase these are required in your Default Profile.

What is needed/allowed in a Profile?

We recommend you include some kind of teleport or transportation method items in your inventory like seen above I have a dramen staff to allow me to use fairy rings and I have runes and Air Battlestaff (Yes the webwalker will handle all starves) to teleport to varrock to bank oruse the edgeville fairy ring. Please include a method of checking for a task aswell (Gem or Slayer Helm) and whatever else you may need like potions or food.

Custom Profiles:

Screenshot of Custom Profiles Tab:

What is this a Custom Profile?

So this is where if you don't want a certain task to use the default profile, then you can override it with a custom profile.

Loaded Monsters Section:

You can you use the search bar to search for a specific monster to edit/view or scroll through to find it. Then just clickthe monster you would like to view/edit and it will update the information on the fight hand side of the user interface and so you can make the appropiate changes.

Info Tab:

This Includes information about the monster like:

• Name
• Level
• Masters
• Gear (Whether is it using the Default or Custom Profile)
• Inventory (Whether is it using the Default or Custom Profile)
• Location
• Required Items
• Skip Task

Pick Your Monster:

This allows you to select which level and location of the monster you want to fight, when you press one the selected monster information updates to show the appropiate data.

Edit Inventory Profile:

Allows you make a Custom Inventory Profile for this Monster.

Edit Gear Profile:

Allows you make a Custom Gear Profile for this Monster.

Edit PrayerProfile:

Allows you make a Prayer Profile for this Monster.

Profiles Tab:

Screenshot of Custom Profiles for selected Monster:

This shows the the current custom profile for the inventory and gear setup and allows you to update them if you want to.

SafeSpot + Cannon Tab:

Screenshot of Custom Profiles of a selected monster for the SafeSpot & Cannon Settings:

Safespot Settings:

• "Edit Safe Spot" Button: This feature allows you to set a safespot and to remove it if you no longer need it. Stand in the position which you would like to use as a safespot and press the button use Current Location to set the safe spot location.

Cannon Settings:

• "Edit Cannon Settings" Button: This feature allows you to set a Cannon spot to be deployed and to remove it if you no longer need it. Stand in the position which you would like to deploy your cannon and press the button use Current Location to set the Cannon location.

Advanced Looting:

Screenshot of the looting tab:

This will allow you to loot items which may be below the loot value but are stackable/valuable to you which can be added to also be looted.

(Make sure looting is enabled under the General Settings tab for it to function)

Simply select an lootable item from the list and use the correct arrow to move it to the items to loot list. And if you no longer want it on the loot list then select it and use the appropiate arrow to move it back to the possible items to loot.

Note: Remember to save Loot Lists so it updates!

 

 

i bought this script in its beta because it was cheaper and i knew it was going to get much, much better. I used it once and got my obby tank banned in 30 mins when i was showering (no fucking clue how that happened, probably a flagged account, first time i botted it after buying it off a guy). I knew this would work well, i just never knew how to use it the correct way.

 

 

Thanks for guide wud reed again

-ign 6/9

Thanks for this! I bought your script a month or 2 ago but havent been able to use it yet as my bots got banned. Will be using this guide and the script within a week or so.

keeps trying to click another monster while already fighting one??

also keeps clicking the monster im fighting its so weird can this get fixed? or tell me whats wrong lol

also keeps clicking the monster im fighting its so weird can this get fixed? or tell me whats wrong lol

 

Post on the script thread if you have problems regarding the script itself...

also keeps clicking the monster im fighting its so weird can this get fixed? or tell me whats wrong lol

 

Can you please post a bug report using the built in feature in the user interface in this thread please: http://osbot.org/forum/topic/92232-

 

Thanks,

 

Precise.

is there a required items list?

 

Liked.

 

May I get a trial to test before purchase?

Edited August 22, 20169 yr by Vichy

Liked.

 

May I get a trial to test before purchase?

 

Enjoy!

Would like a trail before buying

also will this script go to slayer master and get next task and gear up etc?

also will this script go to slayer master and get next task and gear up etc?

yes

Figured it out by being less of a newb, please delete this post

Edited October 17, 20169 yr by scottish89