5 hours ago, talipen said:

on a couple of rounds the script stops attacking, and just stands there. There is nothing in the 'main' section or in the debug. It just stands there and takes hits from the ranger without hitting it back. 

Also all of the pictures/ photos don't work or load. It also means that you cant manually click in the screen because of this. You have to end the script to then click, (pausing/ allowing click access) doesnt work.- see screen shots

The X cross button means I cant click anything 

https://gyazo.com/6db820fd49ba9b5495527b670d7882fa

(I baby sat the script, having not used it for a while, and with manually getting it past those issues it did work. just obviously you expect it to be flawless and not have these issues. Sorry i was unable to find/ give exact information when it did break. If i run again i will keep you posted 

Please verify standard troubleshooting steps have been checked:
- Client zoom is at the default level
- All required hotkeys have been set
- Client is running in Fixed-size mode
- You are running in Stealth-Injection mode (not mirror)
Some of these are checked at startup if started in the tzhaar bank area, but verify none the less.

I am aware of the resource loading issue, but need a the aid of a client dev to reach a solution (@Alek is helping out with this atm).
To enable mouse input, allowing you to click manually, use the enable-input button located to the right of the script stop button.

If this does not help, feel free to add me on skype for further troubleshooting

5 minutes ago, talipen said:

Hi Frost, thanks for your response,

The loading issue is causing it now to register clicks, I have enabled manual clicking yet it still doesn't accept clicks because of the issues with the white box with the red cross.

All of the set ups are correct, as you have said, and had no issues for 61/63 waves however 2 waves during the fight cave (random waves). The bot did not attack the npc and instead stood still. I restarted the script on both occasions and it auto fixed the issue. However if I did not restart it would have used all supplies then died. 

The image loading issue cannot actually prevent clicks from going thru; sounds like there might be a client issue as well if that is happening. AFAIK you have to click on the enable-input button twice (it cycles 3 icons iirc) before input is enabled. Regardless, the input thing unfortunately is not an issue I can reproduce, so I can't offer much advice on that.

Do you remember if the waves that you were stuck on were both waves with 2 of the same ranged enemy? Eg. 2x 360s or 2x 90s? There used to be an uncommon issue where it could get stuck if both spawned offscreen, and subsequently 1 of them attacked the player from an offscreen position. Should have been fixed a few releases back tho.

So everything goes smoothly until jad. Doesn't even turn on prayer and just dies. 

Edited March 20, 20187 yr by DinhiusMaximus

Did 2 runs and died even with 91 range 49 prayer 42 def

8 hours ago, DinhiusMaximus said:

So everything goes smoothly until jad. Doesn't even turn on prayer and just dies. 

Be sure to start it in the tzhaar bank to allow auto configuration of audio settings. This sounds like game Audio wasn't configured properly

People still getting permed first try often? Making a new zerker and would love to try again but it seems most people get a perm on the first run

17 hours ago, FrostBug said:

Be sure to start it in the tzhaar bank to allow auto configuration of audio settings. This sounds like game Audio wasn't configured properly

got it. after the 3rd time i let it grab the supplies itself from the bank and after the 4th attempt it was successful. 

Thanks!

On 20/03/2018 at 11:03 PM, nics too swoll said:

People still getting permed first try often? Making a new zerker and would love to try again but it seems most people get a perm on the first run

Would like to also know any success/fail stories!

you should stop botting, it is not good for people

Edited January 13, 20197 yr by nexio

Just got permed, be very careful.

On 3/26/2018 at 2:19 AM, Blackbird815 said:

Just got permed, be very careful.

Which prayer setting did you use? multi?

So this is a great script done on maxed range tank as a test went through with flying colors then i had my 40 def pure with 70 range now that was a pain, after 4 attempts and changing a few pots around in custom set up i actually fell asleep lol n when i woke i thought was another failed attempt till i logged on n can happily say i now have the fc on both accounts prob s one the best scripts i have ever purchased.

will this one day work for pures ?

script works flawless even got a cape on my pure with 93 ranged 90 hp but the 3 accounts i used it on all ended up with 2 day bans so guessing jagex are on to it

13 hours ago, oohrahim said:

will this one day work for pures ?

No